== Blockchain ==
{| class="wikitable"
!colspan="6"|Blockchain
|-
|getbestblockhash
|-
|getblock "hash" ( verbose )
|-
|getblockchaininfo
|-
|getblockcount
|-
|getblockhash index
|-
|getblockheader "hash" ( verbose )
|-
|getchaintips
|-
|getdifficulty
|-
|getmempoolancestors txid (verbose)
|-
|getmempooldescendants txid (verbose)
|-
|getmempoolentry txid
|-
|getmempoolinfo
|-
|getrawmempool ( verbose )
|-
|gettxout "txid" n ( includemempool )
|-
|gettxoutproof ["txid",...] ( blockhash )
|-
|gettxoutsetinfo
|-
|verifychain ( checklevel numblocks )
|-
|verifytxoutproof "proof"

|}

== Control ==
{| class="wikitable"
!colspan="6"|Control
|-
|getinfo || Returns an object containing various state info.
|{
"version": xxxxx, (numeric) the server version
"protocolversion": xxxxx, (numeric) the protocol version
"walletversion": xxxxx, (numeric) the wallet version
"balance": xxxxxxx, (numeric) the total sexcoin balance of the wallet
"blocks": xxxxxx, (numeric) the current number of blocks processed in the server
"timeoffset": xxxxx, (numeric) the time offset
"connections": xxxxx, (numeric) the number of connections
"proxy": "host:port", (string, optional) the proxy used by the server
"difficulty": xxxxxx, (numeric) the current difficulty
"testnet": true|false, (boolean) if the server is using testnet or not
"keypoololdest": xxxxxx, (numeric) the timestamp (seconds since GMT epoch) of the oldest pre-generated key in the key pool
"keypoolsize": xxxx, (numeric) how many new keys are pre-generated
"unlocked_until": ttt, (numeric) the timestamp in seconds since epoch (midnight Jan 1 1970 GMT) that the wallet is unlocked for transfers, or 0 if the wallet is locked
"paytxfee": x.xxxx, (numeric) the transaction fee set in sxc/kb
"relayfee": x.xxxx, (numeric) minimum relay fee for non-free transactions in sxc/kb
"errors": "..." (string) any error messages
}

|-
|help ( "command" )||List all commands, or get help for a specified command.||
|-
|stop || Stop Sexcoin server.||

|}

== Generating ==
{| class="wikitable"
!colspan="6"|Generating
|-
|generate numblocks ( maxtries )
|-
|generatetoaddress numblocks address (maxtries)

|}
== Mining ==
{| class="wikitable"
!colspan="6"|Mining
|-
|getblocktemplate ( TemplateRequest )
|-
|getmininginfo
|-
|getnetworkhashps ( blocks height )
|-
|prioritisetransaction <txid> <priority delta> <fee delta>
|-
|submitblock "hexdata" ( "jsonparametersobject" )

|}
== Network ==
{| class="wikitable"
!colspan="6"|Network
|-
|addnode "node" "add/remove/onetry" || Attempts add or remove a node from the addnode list. Or try a connection to a node once.||
|-
|getaddednodeinfo dummy ( "node" ) || ||
|-
|getconnectioncount || ||
|-
|getnettotals || ||
|-
|getnetworkinfo || Returns an object containing various state info regarding P2P networking ||
|-
|getpeerinfo||Returns data about each connected network node as a json array of objects.
| {
"id": n, (numeric) Peer index
"addr":"host:port", (string) The ip address and port of the peer
"addrlocal":"ip:port", (string) local address
"services":"xxxxxxxxxxxxxxxx", (string) The services offered
"lastsend": ttt, (numeric) The time in seconds since epoch (Jan 1 1970 GMT) of the last send
"lastrecv": ttt, (numeric) The time in seconds since epoch (Jan 1 1970 GMT) of the last receive
"bytessent": n, (numeric) The total bytes sent
"bytesrecv": n, (numeric) The total bytes received
"conntime": ttt, (numeric) The connection time in seconds since epoch (Jan 1 1970 GMT)
"pingtime": n, (numeric) ping time
"pingwait": n, (numeric) ping wait
"version": v, (numeric) The peer version, such as 7001
"subver": "/Satoshi:0.8.5/", (string) The string version
"inbound": true|false, (boolean) Inbound (true) or Outbound (false)
"startingheight": n, (numeric) The starting height (block) of the peer
"banscore": n, (numeric) The ban score
"synced_headers": n, (numeric) The last header we have in common with this peer
"synced_blocks": n, (numeric) The last block we have in common with this peer
"inflight": [
n, (numeric) The heights of blocks we're currently asking from this peer
...
]
}

|-
|ping || Requests that a ping be sent to all other nodes, to measure ping time. ||
Results provided in getpeerinfo, pingtime and pingwait fields are decimal seconds.
Ping command is handled in queue with all other commands, so it measures processing backlog, not just network ping.
|-
|setban "ip(/netmask)" "add/remove" (bantime) (absolute) || ||
|}

== Rawtransactions ==
{| class="wikitable"
!colspan="6"|Raw Transactions
|-
|createrawtransaction [{"txid":"id","vout":n},...] {"address":amount,"data":"hex",...} ( locktime )
|-
|decoderawtransaction "hexstring"
|-
|decodescript "hex"
|-
|fundrawtransaction "hexstring" ( options )
|-
|getrawtransaction "txid" ( verbose )
|-
|sendrawtransaction "hexstring" ( allowhighfees )
|-
|signrawtransaction "hexstring" ( [{"txid":"id","vout":n,"scriptPubKey":"hex","redeemScript":"hex"},...] ["privatekey1",...] sighashtype )

|}

== Util ==
{| class="wikitable"
!colspan="6"|Util
|-
|createmultisig nrequired ["key",...]
|-
|estimatefee nblocks
|-
|estimatepriority nblocks
|-
|estimatesmartfee nblocks
|-
|estimatesmartpriority nblocks
|-
|signmessagewithprivkey "privkey" "message"
|-
|validateaddress "sexcoinaddress"
|-
|verifymessage "sexcoinaddress" "signature" "message"

|}

== Wallet ==
{| class="wikitable"
!colspan="6"|Wallet
|-
|abandontransaction "txid"
|-
|addmultisigaddress nrequired ["key",...] ( "account" )
|-
|addwitnessaddress "address"
|-
|backupwallet "destination"
|-
|dumpprivkey "sexcoinaddress"
|-
|dumpwallet "filename"
|-
|getaccount "sexcoinaddress"
|-
|getaccountaddress "account"
|-
|getaddressesbyaccount "account"
|-
|getbalance ( "account" minconf includeWatchonly )
|-
|getnewaddress ( "account" )
|-
|getrawchangeaddress
|-
|getreceivedbyaccount "account" ( minconf )
|-
|getreceivedbyaddress "sexcoinaddress" ( minconf )
|-
|gettransaction "txid" ( includeWatchonly )
|-
|getunconfirmedbalance
|-
|getwalletinfo
|-
|importaddress "address" ( "label" rescan p2sh )
|Adds an address or script (in hex) that can be watched as if it were in your wallet but cannot be used to spend
|-
|importprivkey "sexcoinprivkey" ( "label" rescan )
|-
|importprunedfunds
|-
|importpubkey "pubkey" ( "label" rescan )
|-
|importwallet "filename"
|-
|keypoolrefill ( newsize )
|-
|listaccounts ( minconf includeWatchonly)
|-
|listaddressgroupings
|-
|listlockunspent
|-
|listreceivedbyaccount ( minconf includeempty includeWatchonly)
|-
|listreceivedbyaddress ( minconf includeempty includeWatchonly)
|-
|listsinceblock ( "blockhash" target-confirmations includeWatchonly)
|-
|listtransactions ( "account" count from includeWatchonly)
|-
|listunspent ( minconf maxconf ["address",...] )
|-
|lockunspent unlock ([{"txid":"txid","vout":n},...])
|-
|move "fromaccount" "toaccount" amount ( minconf "comment" )
|-
|removeprunedfunds "txid"
|-
|sendfrom "fromaccount" "tosexcoinaddress" amount ( minconf "comment" "comment-to" )
|-
|sendmany "fromaccount" {"address":amount,...} ( minconf "comment" ["address",...] )
|-
|sendtoaddress "sexcoinaddress" amount ( "comment" "comment-to" subtractfeefromamount )
|-
|setaccount "sexcoinaddress" "account"
|-
|settxfee amount
|-
|signmessage "sexcoinaddress" "message"
|-
|walletlock
|-
|walletpassphrase "passphrase" timeout
|-
|walletpassphrasechange "oldpassphrase" "newpassphrase"
|-

|}

== Related articles ==
* [[sexcoin.conf]]

[[Category:Technical]]
[[Category:Developer]]

Please note that all contributions to Sexcoin Wiki are considered to be released under the GNU Free Documentation License 1.3 or later (see Sexcoin Wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

RPC Commands

2017-08-07T16:29:15Z

Lavajumper: Lavajumper moved page RPC Commands v0.10.4.0 to RPC Commands without leaving a redirect

RPC Commands 0.6.4.6

2017-08-07T16:28:41Z

Lavajumper: Lavajumper moved page RPC Commands to RPC Commands 0.6.4.6 without leaving a redirect: renamed to reflect old version

==''This information is close, but NOT CURRENT''==

''This page needs updated for v 0.10.4.0''

V 0.6.4.6

Most of the '''[[Sexcoin]] API''' calls are the same as they are in [https://en.bitcoin.it/wiki/Original_Bitcoin_client/API_calls_list Bitcoin].
: ''Required arguments are denoted inside < and > Optional arguments are inside [ and ].''

{|class="wikitable"
! Command !! Parameters !! Description !! Requires unlocked wallet
|-
| addmultisigaddress || <nrequired> <'["key","key"]'> [account] || Add a nrequired-to-sign multisignature address to the wallet. Each key is a Sexcoin address or hex-encoded public key. If [account] is specified, assign address to [account]. || N
|-
| addnode || <node> <add/remove/onetry> || '''version 0.6.4''' Attempts add or remove <node> from the addnode list or try a connection to <node> once. || N
|-
| backupwallet || <destination> || Safely copies wallet.dat to destination, which can be a directory or a path with filename. || N
|-
| bannode || <node> <expiration> || '''OMG2 only''' Bans <node> until unix timestamp <expiration>. Set <expiration> to -1 to unban a node. || N
|-
| createmultisig || <nrequired> <'["key,"key"]'> || Creates a multi-signature address and returns a json object ||
|-
| createrawtransaction || [{"txid":txid,"vout":n},...] {address:amount,...} || Creates a raw transaction spending given inputs. || N
|-
| decoderawtransaction || <hex string> || Produces a human-readable JSON object for a raw transaction. || N
|-
| dumpprivkey || <sexcoinaddress> || Reveals the private key corresponding to <sexcoinaddress> || Y
|-
| encryptwallet || <passphrase> || Encrypts the wallet with <passphrase>. || N
|-
| getaccount || <sexcoinaddress> || Returns the account associated with the given address. || N
|-
| getaccountaddress || <account> || Returns the current Sexcoin address for receiving payments to this account. || N
|-
| getaddednodeinfo || <dns> [node] || '''version 0.6.4''' Returns information about the given added node, or all added nodes (note that onetry addnodes are not listed here) If dns is false, only a list of added nodes will be provided, otherwise connected information will also be available. || N
|-
| getaddressesbyaccount || <account> || Returns the list of addresses for the given account. || N
|-
| getbalance || [account] [minconf=1] || If [account] is not specified, returns the server's total available balance. If [account] is specified, returns the balance in the account. || N
|-
| getbestblockhash || || '''version 0.6.4''' Returns the hash of the newest block in the longest block chain. || N
|-
| getblock || <hash> || Returns information about the block with the given hash. || N
|-
| getblockcount || || Returns the number of blocks in the longest block chain. || N
|-
| getblockhash || <index> || Returns hash of block in best-block-chain at <index>; index 0 is the genesis block || N
|-
| getblocktemplate || [params] || Returns data needed to construct a block to work on || N
|-
| getconnectioncount || || Returns the number of connections to other nodes. || N
|-
| getdifficulty || || Returns the proof-of-work difficulty as a multiple of the minimum difficulty. || N
|-
| getinfo || || Returns an object containing various state info. || N
|-
| getmininginfo || || Returns an object containing mining-related information: blocks, currentblocksize, currentblocktx, difficulty, errors, generate, genproclimit, hashespersec, networkhashps, pooledtx, testnet || N
|-
| getnetworkhashps || [blocks] [height] || Returns the estimated network hashes per second based on the last 120 blocks. Pass in [blocks] to override # of blocks, -1 specifies since last difficulty change. Pass in [height] to estimate the network speed at the time when a certain block was found. '''Optional [height] parameter added in 0.6.4.''' || N
|-
| getnewaddress || [account] || Returns a new Sexcoin address for receiving payments. If [account] is specified (recommended), it is added to the address book so payments received with the address will be credited to [account]. || N
|-
| getpeerinfo || || Returns data about each connected node. || N
|-
| getrawmempool || || Returns all transaction ids in memory pool || N
|-
| getrawtransaction || <txid> [verbose=0] || Returns raw transaction representation for given transaction id. || N
|-
| getreceivedbyaccount || [account] [minconf=1] || Returns the total amount received by addresses with [account] in transactions with at least [minconf] confirmations. If [account] not provided return will include all transactions to all accounts. (version 0.6.4) || N
|-
| getreceivedbyaddress || <sexcoinaddress> [minconf=1] || Returns the total amount received by <sexcoinaddress> in transactions with at least [minconf] confirmations. While some might consider this obvious, value reported by this only considers *receiving* transactions. It does not check payments that have been made *from* this address. In other words, this is not "getaddressbalance". Works only for addresses in the local wallet, external addresses will always show 0. || N
|-
| gettransaction || <txid> || Returns an object about the given transaction containing: amount, confirmations, txid, time<ref>From block timestamp, unless transaction was already in memory pool then the local time when the client added the transaction to its memory pool</ref>, details (an array of objects containing: account, address, category, amount, fee) || N
|-
| gettxout || <txid> <n> [includemempool=true] || Returns details about an unspent transaction output (UTXO) || N
|-
| gettxoutsetinfo || || Returns statistics about the unspent transaction output (UTXO) set || N
|-
| getwork || [data] || If [data] is not specified, returns formatted hash data to work on: midstate, data, hash1, target. If [data] is specified, tries to solve the block and returns true if it was successful. || N
|-
| help || [command] || List commands, or get help for a command. || N
|-
| importprivkey || <sexcoinprivkey> [label] [rescan=true]|| Adds a private key (as returned by dumpprivkey) to your wallet. This may take a while, as a rescan is done, looking for existing transactions. '''Optional [rescan] parameter added in 0.6.4.''' || Y
|-
| keypoolrefill || || Fills the keypool, requires wallet passphrase to be set. || Y
|-
| listaccounts || [minconf=1] || Returns Object that has account names as keys, account balances as values. || N
|-
| listaddressgroupings || || Returns all addresses in the wallet and info used for coincontrol. || N
|-
| listbannednodes || || '''OMG2 only''' Returns a list of currently banned nodes along with the ban expiration timestamps. || N
|-
| listlockunspent || || Returns list of temporarily unspendable outputs. || N
|-
| listreceivedbyaccount || [minconf=1] [includeempty=false] || Returns an array of objects containing: account, amount, confirmations || N
|-
| listreceivedbyaddress || [minconf=1] [includeempty=false] || Returns an array of objects containing: address, account, amount, confirmations. To get a list of accounts on the system, execute litecoind listreceivedbyaddress 0 true || N
|-
| listsinceblock|| [blockhash] [target-confirmations] || Get all transactions in blocks since block [blockhash], or all transactions if omitted. || N
|-
| listtransactions || [account] [count=10] [from=0] || Returns up to [count] most recent transactions skipping the first [from] transactions for account [account]. If [account] not provided will return recent transaction from all accounts. || N
|-
| listunspent || [minconf=1] [maxconf=9999999] ["address",...] || Returns array of unspent transaction inputs in the wallet. || N
|-
| lockunspent || <unlock?> [array-of-Objects] || '''version 0.8''' Updates list of temporarily unspendable outputs || N
|-
| move || <fromaccount> <toaccount> <amount> [minconf=1] [comment] || Move from one account in your wallet to another || N
|-
| sendfrom || <fromaccount> <tosexcoinaddress> <amount> [minconf=1] [comment] [comment-to] || <amount> is a real and is rounded to 8 decimal places. Will send the given amount to the given address, ensuring the account has a valid balance using [minconf] confirmations. Returns the transaction ID if successful (not in JSON object). || Y
|-
| sendmany || <fromaccount> {address:amount,...} [minconf=1] [comment] || amounts are double-precision floating point numbers || Y
|-
| sendrawtransaction || <hexstring> || Submits raw transaction (serialized, hex-encoded) to local node and network. || N
|-
| sendtoaddress || <sexcoinaddress> <amount> [comment] [comment-to] || <amount> is a real and is rounded to 8 decimal places. Returns the transaction ID <txid> if successful. || Y
|-
| setaccount || <sexcoinaddress> <account> || Sets the account associated with the given address. Assigning address that is already assigned to the same account will create a new address associated with that account. || N
|-
| setmininput || <amount> || <amount> is a real and is rounded to the nearest 0.00000001 || N
|-
| settxfee || <amount> || <amount> is a real and is rounded to the nearest 0.00000001 || N
|-
| signmessage || <sexcoinaddress> <message> || Sign a message with the private key of an address. || Y
|-
| signrawtransaction || <hexstring> [{"txid":txid,"vout":n,"scriptPubKey":hex},...] [<privatekey1>,...] || Adds signatures to a raw transaction and returns the resulting raw transaction. || Y/N
|-
| stop || || Stop Sexcoin server. || N
|-
| submitblock || <hex data> [optional-params-obj] || Attempts to submit new block to network. || N
|-
| validateaddress || <sexcoinaddress> || Return information about <sexcoinaddress>. || N
|-
| verifychain || || '''version 0.6.4''' Verifies chain database at runtime. || N
|-
| verifymessage || <sexcoinaddress> <signature> <message> || Verifies a signed message. || N
|-
| walletlock || || Removes the wallet encryption key from memory, locking the wallet. After calling this method, you will need to call walletpassphrase again before being able to call any methods which require the wallet to be unlocked. || N
|-
| walletpassphrase || <passphrase> <timeout> || Stores the wallet decryption key in memory for <timeout> seconds. || N
|-
| walletpassphrasechange || <oldpassphrase> <newpassphrase> || Changes the wallet passphrase from <oldpassphrase> to <newpassphrase>. || N

|}

== References ==
<references />

== Related articles ==
* [[sexcoin.conf]]

[[Category:Technical]]
[[Category:Developer]]

Please note that all contributions to Sexcoin Wiki are considered to be released under the GNU Free Documentation License 1.3 or later (see Sexcoin Wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

2017-07-11T14:01:05Z

Lavajumper:

Command line options

2017-07-11T13:59:27Z

Lavajumper:

Command line options

2017-07-11T13:56:03Z

Lavajumper:

Command line options v 0.6.4.6

2017-07-11T13:51:34Z

Lavajumper: Lavajumper moved page Command line options to Command line options v 0.6.4.6

v0.6.4.6

-? This help message
-conf=<file> Specify configuration file (default: litecoin.conf)
-pid=<file> Specify pid file (default: litecoind.pid)
-gen Generate coins (default: 0)
-datadir=<dir> Specify data directory
-dbcache=<n> Set database cache size in megabytes (default: 25)
-timeout=<n> Specify connection timeout in milliseconds (default: 5000)
-proxy=<ip:port> Connect through socks proxy
-socks=<n> Select the version of socks proxy to use (4-5, default: 5)
-tor=<ip:port> Use proxy to reach tor hidden services (default: same as -proxy)
-dns Allow DNS lookups for -addnode, -seednode and -connect
-port=<port> Listen for connections on <port> (default: 9333 or testnet: 19333)
-maxconnections=<n> Maintain at most <n> connections to peers (default: 125)
-addnode=<ip> Add a node to connect to and attempt to keep the connection open
-connect=<ip> Connect only to the specified node(s)
-seednode=<ip> Connect to a node to retrieve peer addresses, and disconnect
-externalip=<ip> Specify your own public address
-onlynet=<net> Only connect to nodes in network <net> (IPv4, IPv6 or Tor)
-discover Discover own IP address (default: 1 when listening and no -externalip)
-checkpoints Only accept block chain matching built-in checkpoints (default: 1)
-listen Accept connections from outside (default: 1 if no -proxy or -connect)
-bind=<addr> Bind to given address and always listen on it. Use [host]:port notation for IPv6
-dnsseed Find peers using DNS lookup (default: 1 unless -connect)
-banscore=<n> Threshold for disconnecting misbehaving peers (default: 100)
-bantime=<n> Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
-maxreceivebuffer=<n> Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
-maxsendbuffer=<n> Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
-upnp Use UPnP to map the listening port (default: 1 when listening)
-paytxfee=<amt> Fee per KB to add to transactions you send
-server Accept command line and JSON-RPC commands
-testnet Use the test network
-debug Output extra debugging information. Implies all other -debug* options
-debugnet Output extra network debugging information
-logtimestamps Prepend debug output with timestamp
-shrinkdebugfile Shrink debug.log file on client startup (default: 1 when no -debug)
-printtoconsole Send trace/debug info to console instead of debug.log file
-printtodebugger Send trace/debug info to debugger
-rpcuser=<user> Username for JSON-RPC connections
-rpcpassword=<pw> Password for JSON-RPC connections
-rpcport=<port> Listen for JSON-RPC connections on <port> (default: 9332 or testnet: 19332)
-rpcallowip=<ip> Allow JSON-RPC connections from specified IP address
-rpcthreads=<n> Set the number of threads to service RPC calls (default: 4)
-blocknotify=<cmd> Execute command when the best block changes (%s in cmd is replaced by block hash)
-walletnotify=<cmd> Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
-alertnotify=<cmd> Execute command when a relevant alert is received (%s in cmd is replaced by message)
-upgradewallet Upgrade wallet to latest format
-keypool=<n> Set key pool size to <n> (default: 100)
-rescan Rescan the block chain for missing wallet transactions
-salvagewallet Attempt to recover private keys from a corrupt wallet.dat
-checkblocks=<n> How many blocks to check at startup (default: 288, 0 = all)
-checklevel=<n> How thorough the block verification is (0-4, default: 3)
-txindex Maintain a full transaction index (default: 0)
-loadblock=<file> Imports blocks from external blk000??.dat file
-reindex Rebuild block chain index from current blk000??.dat files
-par=<n> Set the number of script verification threads (up to 16, 0 = auto, <0 = leave that many cores free, default: 0)
-spendzeroconfchange Spend unconfirmed change when sending transactions (default: 1)

Command line options

2017-07-11T13:51:34Z

Lavajumper: Lavajumper moved page Command line options to Command line options v 0.6.4.6

#REDIRECT [[Command line options v 0.6.4.6]]

Sexcoin Wiki

2017-07-11T13:41:45Z

Lavajumper: